UNIVERSAL RAILING, PLANNING AND DESIGN
The railings are normally delivered from stock and are easily adapted by the fitter. This makes it possible to install without making detailed measurements prior to delivery. If the railings are to be delivered customised from the factory, each universal railing is drawn up specially and the drawing is sent to the customer for approval prior to manufacturing.
Quick Links
Geometry | Mesh Widths | Construction dimensions | Opening area | Tolerances, Dimensions | Fixing Marking | Surface treatment | Z-profile | Loads
Assembly
For joining Universal railing, there are many different assembly accessories available based on your needs.
Fixing, Top Installation
Intended to be screwed into e.g. wood or concrete. Can be welded in place.
To secure the railing post, a bolt, a locking washer and a nut are required.
Finish: Hot dip galvanised
Fixing, Top Installation
Name | Dimensions (mm) | Part no. | Stocked |
---|---|---|---|
Single | 125 x 125 x 108 | UG1000 | ◉ |
Double | 200 x 125 x 108 | UG2000 | ◉ |
Fixing, Side Installation
Intended to be screwed into e.g. wood or concrete. Can also be welded in place.
The side brackets are available in right and left hand versions. The right bracket is located to the right when looking at the installation side. The fixing has a serrated post to facilitate installation at the correct height.
To secure the railing post, a bolt, a locking washer and a nut are required.
Finish: Hot dip galvanised
Fixing, Side Installation
Name | Dimensions (mm) | Part no. | Stocked |
---|---|---|---|
Left | 80 x 35 x 280 | UV1001 | ◉ |
Right | 80 x 35 x 280 | UV1002 | ◉ |
Fixings Top & side installation
Fixings Top & side installation
Fixings Top & side installation
Name | Part no. | Stocked |
---|---|---|
Locking washer, 10 pcs. | UL4201 | ◉ |
Bolt set, 10 pcs. | BU1201 | ◉ |
Nut, set 10 pcs. | MU1001 | ◉ |
Wall mount
For ending the railing against a wall or post. The wall mount is available for handrails and intermediate rails.
Finish: Hot dip galvanised
Wall mount
Name | Dimensions (mm) | Part no. | Stocked |
---|---|---|---|
Bracket handrail | 35 x 59,2 | UV4200 | ◉ |
Bracket intermediate rail | 20 x 39,7 | UV2700 | ◉ |
Ground mount
The mount is manufactured from folded sheet metal and it provides stable fixing when sunk into the ground with macadam or crushed stone in the pit. The mount can also be used for embedding in concrete.
The mount is available in single and double versions.
Finish: Hot dip galvanised
Ground mount
Name | Part no. | Stocked |
---|---|---|
Ground attachment, single 42 mm | UM1000 | ◉ |
Ground attachment, double 42 mm | UM2000 | ◉ |
Kick strip
Kick strips are available for all railing lengths, as well as for railing corners. The kick strip is attached to the railing bow using self-tapping screws.
Height: 100 mm
Finish: Hot dip galvanised
Kick Strip
Name | Length (mm) | Part no. | Stocked |
---|---|---|---|
Kick strip | 390 | SL0410 | ◉ |
Kick strip | 490 | SL0510 | ◉ |
Kick strip | 690 | SL0710 | ◉ |
Kick strip | 990 | SL1010 | ◉ |
Kick strip | 1490 | SL1510 | ◉ |
Kick strip | 1990 | SL2010 | ◉ |
Kick strip, Corner railing | 335,6 x 335,6 | SL4040 | ◉ |
Concrete base
Name | Dimensions | Height (mm) | Part no. | Stocked |
---|---|---|---|---|
Concrete base | 350 x 240 | 125 | BF2000 | ◉ |