FIXINGS
Grating, slit plank type floor and plank type flooring should be anchored to the supporting structure. This can be done in various ways. Here are some alternatives that Weland recommends for securing the various grating products in the support structure.
Quick Links
Complete Fixings | Separate Fixings | Separate Fixings for Plank | Complete Fixings for Plank
Stock fixings are available as both complete and separate components. Fixings are also available in hot dip galvanised and stainless steel versions.
See more about parts for gratings, slit plank type flooring and plank type flooring and find what will suit your installation.
Complete fixings for gratings
Grating fixings are available as both complete and separate components. Standard pack for complete fixings is 100 components per box.
Clamp
Complete clamps for gratings in four parts. Top part, bottom part, screw and nut. Available in screw lengths 50, 60, 70 and 80 mm. Installed without drilling into the supporting structure.
Suitable for grating types: A, D, F, H, J, HN9-T, HB9-T and JN9-T.
Finish: Hot dip galvanised or stainless steel, grade EN 1.4404
| For plank type | For grating height (mm) | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| D4, D6, A22x22 | 20-30 | Hot dip galvanized | 163222011 | ◉ |
| D4, D6, A22x22 | 30-40 | Hot dip galvanized | 163222021 | ◉ |
| D4, D6, A22x22 | 40-50 | Hot dip galvanized | 163222031 | ◉ |
| F4 | 20-30 | Hot dip galvanized | 163252011 | ◉ |
| F4 | 30-40 | Hot dip galvanized | 163252021 | ◉ |
| F4 | 40-50 | Hot dip galvanized | 163252031 | ◉ |
| F4 | 50-60 | Hot dip galvanized | 163252041 | ◉ |
| H3, H4, H6, H9, HN9-T | 20-30 | Hot dip galvanized | 163332011 | ◉ |
| H3, H4, H6, H9, HN9-T | 30-40 | Hot dip galvanized | 163332021 | ◉ |
| H3, H4, H6, H9, HN9-T | 40-50 | Hot dip galvanized | 163332031 | ◉ |
| H3, H4, H6, H9, HN9-T | 50-60 | Hot dip galvanized | 163332041 | ◉ |
| H3, H4, H6, H9 | 30-40 | Stainless | 163332022 | ◉ |
| H3, H4, H6, H9 | 40-50 | Stainless | 163332032 | ◉ |
| J9, JN9-T | 20-30 | Hot dip galvanized | 163413011 | ◉ |
| J9, JN9-T | 30-40 | Hot dip galvanized | 163413021 | ◉ |
| J9, JN9-T | 40-50 | Hot dip galvanized | 163413031 | ◉ |
| J9, JN9-T | 50-60 | Hot dip galvanized | 163413041 | ◉ |
| H3, H4, H6, H9, J9 | 20-30 | Hot dip galvanized<br>(top piece stainless) | 163252511 | ◉ |
| H3, H4, H6, H9, J9 | 30-40 | Hot dip galvanized<br>(top piece stainless) | 163252521 | ◉ |
| H3, H4, H6, H9, J9 | 40-50 | Hot dip galvanized<br>(top piece stainless) | 163252531 | ◉ |
| H3, H4, H6, H9, J9 | 50-60 | Hot dip galvanized<br>(top piece stainless) | 163252541 | ◉ |
Clamps for grating joint
Complete clamp in four parts. Special top part, bottom part, screw and nut. Available in screw lengths 50, 60, 70 and 80 mm. Installed without drilling into the supporting structure.
Suitable for plank types: H and J.
Finish: Hot dip galvanised
| For plank type | For grating height (mm) | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| H3, H4, H6, H9 | 20-30 | Hot dip galvanized | 163362511 | ◉ |
| H3, H4, H6, H9 | 30-40 | Hot dip galvanized | 163362521 | ◉ |
| H3, H4, H6, H9 | 40-50 | Hot dip galvanized | 163362531 | ◉ |
| H3, H4, H6, H9 | 50-60 | Hot dip galvanized | 163362541 | ◉ |
| J9 | 20-30 | Hot dip galvanized | 163442511 | ◉ |
| J9 | 30-40 | Hot dip galvanized | 163442521 | ◉ |
| J9 | 40-50 | Hot dip galvanized | 163442531 | ◉ |
| J9 | 50-60 | Hot dip galvanized | 163442541 | ◉ |
Clamp for close-mesh grating
Complete clamp for close-mesh grating in four parts. Special top part, bottom part, screw and nut. Available in screw lengths 50 and 70 mm. Installed without drilling into the supporting structure.
Suitable for grating types: A, B, D and N.
Version: Hot dip galvanised or stainless steel, grade EN 1.4404
Stocked
| For plank type | For grating height (mm) | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| B, D, N | 20 | Hot dip galvanized | 163280011 | ◉ |
| B, D, N | 20 | Stainless | 163280012 | ◉ |
| B, D, N | 25-40 | Hot dip galvanized | 163280031 | ◉ |
| B, D, N | 25-40 | Stainless | 163280032 | ◉ |
J hook for grating and A-type grating
Complete J-hook in three parts. J-hook, washer and nut. Fits all types of grating and A-type grating. Available with screw lengths 38, 48, 58, 68 and 78 mm. Holes must be drilled in the supporting structure.
Suitable for grating types: A, B, D, F, H, I, J and N.
Finish: Surface treatment zinc/nickel
| Dimensions | Thread length (mm) | For grating height (mm) | Part no. | Stocked |
|---|---|---|---|---|
| M8 x 38 | 20 | <20 | 163603801 | ◉ |
| M8 x 48 | 20 | 25-30 | 163604801 | ◉ |
| M8 x 58 | 20 | 35-40 | 163605801 | ◉ |
| M8 x 68 | 20 | 45-50 | 163606801 | ◉ |
| M8 x 78 | 20 | 55-60 | 163607801 | ◉ |
Separate fixings for gratings
Grating fixings are available as both complete and separate components. Clips are available for ensuring load transfer between gratings. Standard pack for separate fixing components is 100 components per box.
Top section
NOTE! The top part with dimensions 22 x 20 mm can only be used together with screw M8x50 – M8x80 mm.
Finish: Hot dip galvanised or stainless
| For plank type | Dimensions (mm) | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| D4, D9, A22x22 | 22 x 20 | Hot dip galvanized | 163222001 | ◉ |
| F4, F9 | 25 x 20 | Hot dip galvanized | 163252001 | ◉ |
| H3, H4, H6, H9 | 33 x 20 | Hot dip galvanized | 163332001 | ◉ |
| H3, H4, H6, H9 | 33 x 20 | Stainless | 163332002 | ◉ |
| J9 | 41 x 30 | Hot dip galvanized | 163413001 | ◉ |
Top section
Finish: Stainless steel
| For plank type | Dimensions (mm) | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| H3, H4, H6, H9, J9 | 25 x 25 | Stainless | 1632502 | ◉ |
Top section, close-mesh grating
Finish: Hot dip galvanised or stainless
| For plank type | Diameter | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| B, D, N, A22x22 | 28 | Hot dip galvanized | 163280001 | ◉ |
| B, D, N, A22x22 | 28 | Stainless | 163280002 | ◉ |
Top part for grating joint
Finish: Hot dip galvanised
| For plank type | Dimensions (mm) | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| H3, H4, H6, H9 | 36 x 25 | Hot dip galvanized | 163362501 | ◉ |
| J9 | 44 x 25 | Hot dip galvanized | 163442501 | ◉ |
Screw
Finish: Hot dip galvanised or stainless
| For grating height (mm) | Dimensions | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| 20-30 | M8 x 50 | Hot dip galvanized | 163605001 | ◉ |
| 30-40 | M8 x 60 | Hot dip galvanized | 163606001 | ◉ |
| 30-40 | M8 x 60 | Stainless | 163606002 | ◉ |
| 40-50 | M8 x 70 | Hot dip galvanized | 163607001 | ◉ |
| 40-50 | M8 x 70 | Stainless | 163607002 | ◉ |
| 50-60 | M8 x 80 | Hot dip galvanized | 163608001 | ◉ |
Screw, counter-sunk
Finish: Hot dip galvanised or stainless
| For grating height (mm) | Dimensions | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| 20-30 | M8 x 50 | Hot dip galvanized | 1636050041 | ◉ |
| 20-30 | M8 x 50 | Stainless | 1636050042 | ◉ |
| 30-40 | M8 x 70 | Hot dip galvanized | 1636070041 | ◉ |
| 30-40 | M8 x 70 | Stainless | 1636070042 | ◉ |
Screw, self-tapping
Finish: Surface treatment Zn/Ni C4
| For grating height (mm) | Dimensions | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| 20-40 | M8 x 50 | bright zinc plated | 163615001 | ◉ |
Screw, self drilling
Bit capacity max. 6 mm thickness.
Finish: Surface treatment Zn/Ni C4
| For grating height (mm) | Dimensions | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| 20-30 | B14 x 50 | bright zinc plated | 163145001 | ◉ |
Drill screw Max. 6 mm
Torx T30. Bit capacity max. 6 mm thickness.
Finish: Surface treatment Zn/Ni C4
| For plank type | Dimensions | Part no. | Stocked |
|---|---|---|---|
| B, D, N, A22x22 | 6,3 x 60 | 163636001 | ◉ |
Drill Screw Max. 12 mm
Drilling screw with thread section and screw head made of stainless steel A2 with drill tip made of carbon steel. Bit capacity max. 12 mm thickness.
Finish: Stainless steel
| For grating height (mm) | Dimensions | Part no. | Stocked |
|---|---|---|---|
| 20-25 | 5,5 x 50 | 163555002 | ◉ |
| 30-40 | 5,5 x 65 | 163556502 | ◉ |
Track screw
Track screw with fillister head.
Finish: Stainless steel
| For plank type | Dimensions | Part no. | Stocked |
|---|---|---|---|
| A-type Grating with mesh size c/c 33×11 | M8 x 60 | 164608602 | ◉ |
Bit for self-tapping bolt
Finish: Surface treatment Zn/Ni C4
| Name | Dimensions (mm) | Part no. | Stocked |
|---|---|---|---|
| Drill for self-cutting screw | 7,6 | 16376 | ◉ |
Bottom section
Finish: Hot dip galvanised or stainless
| For plank type | Dimensions | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| A, B, D, F, H, N | 40 mm | Hot dip galvanized | 163400001 | ◉ |
| A, B, D, F, H, N | 40 mm | Stainless | 163400002 | ◉ |
| J, HN9-T, HB9-T, JN9-T | 50 mm | Hot dip galvanized | 163500001 | ◉ |
| J, HN9-T, HB9-T, JN9-T | 50 mm | Stainless | 163500002 | ◉ |
Nut for bottom part
Fits e.g. the above bottom section. M8
Finish: Hot dip galvanised or stainless
| For plank type | Dimensions | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| A, B, D, F, H, N | 15 x 18 mm | Hot dip galvanized | 163601501 | ◉ |
| A, B, D, F, H, N | 15 x 18 mm | Stainless | 163601502 | ◉ |
| J, HN9-T, HB9-T, JN9-T | 22 x 27 mm | Hot dip galvanized | 163602201 | ◉ |
| J, HN9-T, HB9-T, JN9-T | 22 x 27 mm | Stainless | 163602202 | ◉ |
Nylock nut
Fits e.g. J-hook. M12.
| Name | Part no. | Stocked | ||||||
|---|---|---|---|---|---|---|---|---|
| M12 RF A4 | 1646120012 |
Fits e.g. J-hook. M12.
|
Clips for grating
Clips for load transfer in connection with free support of gratings. The clips contribute to keeping the grating as one whole. Suitable for all types of grating with heights 20, 25, 30, 35 and 40 mm.
Suitable for grating types: A, B, D, F, H, I, J and N.
Finish: Stainless steel, grade EN 1.4404
Installation instructions (See slideshow)
1. Push the clip into the gap between two gratings.
2. Turn the clip.
3. Knock the top part of the clip down with a hammer to secure.
| For grating height (mm) | Part no. | Stocked |
|---|---|---|
| 20 | 163032032 | ◉ |
| 25 | 163032532 | ◉ |
| 30 | 163033032 | ◉ |
| 35 | 163033532 | ◉ |
| 40 | 163034032 | ◉ |
Separate fixing components for plank type flooring
Separate fixing components for plank type flooring. Standard pack for separate fixing components is 100 components per box.
Fixing screw
Fixing screw MFT Taptite M6x65. Holes must be drilled in the supporting beams.
Suitable for grating types: Plank type flooring
Finish: ZnNi
| Name | For plank type | Part no. | Stocked |
|---|---|---|---|
| Screw | Plank type flooring 50 mm | 0501381 | ◉ |
Complete fixing components for slit plank type flooring
Slit plank type flooring fixings are available as both complete and separate components. The fixing components can also be used for LDS slit plank type flooring. Standard pack for complete fixings is 100 components per box.
Clamp – 3 parts
Complete clamp in three parts for fixing slit plank type flooring. Top section, screw (M8) and nut. Available in screw lengths 70 and 100 mm. Holes must be drilled in the supporting beams.
Suitable for grating types: Slit plank type flooring with 40 and 70 mm height.
Finish: Hot dip galvanised top section. Screw and nut in stainless steel.
| Name | For grating height (mm) | Part no. | Stocked |
|---|---|---|---|
| Complete clamp | 40 | 1634002 | ◉ |
| Complete clamp | 70 | 1637002 | ◉ |
Clamp – 4 parts
Complete clamp in four parts for fixing slit plank type flooring. Top part, bottom part, screw and nut. Available in screw lengths 70 and 100 mm. Installed without drilling into the supporting structure.
Suitable for grating types: Slit plank type flooring with 40 and 70 mm height.
Finish: Hot dip galvanised top and bottom section. Screw and nut are in stainless steel.
| Name | For grating height (mm) | Part no. | Stocked |
|---|---|---|---|
| Complete clamp | 40 | 1634001 | ◉ |
| Complete clamp | 70 | 1637001 | ◉ |
Separate fixing components for slit plank type flooring
Many separate components such as screw are available. A standard pack comprises 100 components per box.
Top section, slit plank type flooring/plank type flooring
Top section for slit plank type flooring and plank type flooring LDS.
Finish: Hot dip galvanised
| For plank type | Dimensions (mm) | Surface treatment | Part no. | Stocked |
|---|---|---|---|---|
| Slit grating | 22 x 60 | Hot dip galvanized | 16360221 | ◉ |
