CAT LADDERS

Cat Ladders

Ladder

Lightweight ladder offering good stability. The ladder’s stringers are in a roll-formed U-profile. The rungs are profiled to reduce the risk of slipping and are swaged on both the inside and outside for double safety. Design according to SS 831340 and SS-EN ISO 14122-4.

Name Length x Width (mm) Part No.
Ladder 1500 x 400 mm ST1540
Ladder 1800 x 400 mm ST1840
Ladder 2400 x 400 mm ST2440
Ladder 3000 x 400 mm ST3040

 

Joint Set

One set is required per fishplate bracket.

* Installed with eight bolts and nuts per set.

Name Part No.
Fishplate brackets SK2500
Set of screws M10x20 (10 pcs)* BU1201
Set of nuts M10 (10 pcs)* MU1001

 

Pair of Brackets

Which bracket you should select depends on the distance between the outer wall and the outer edge of the gutter.

The max. distance between fixing points in the wall is 2500 mm. The brackets are placed closer together if the wall construction demands this.

Fixed Brackets

* Installed with two bolts and nuts per set.

Name

Part No.

Brackets 150 mm

KS0150

Brackets 300 mm

KS0300

Set of screws M10x20 (10 pcs)*

BU1201

Set of nuts M10 (10 pcs)*

MU1001

Adjustable Brackets

* Installed with 8 bolts and nuts per set.

Name

Part No.

Adjustable Brackets 450-700 mm

KS4570

Adjustable Brackets 700-1000 mm

KS7010

Set of screws M10x20 (10 pcs)*

BU1201

Set of nuts M10 (10 pcs)*

MU1001

Base Plate

One base plate is required per bracket.

* Installed with two bolts and nuts per base plate.
** Screw set without drill tip, for sheet thickness < 0.7 mm. Installed with six screws per base plate.
*** Screw set with drill tip, for sheet thickness ≥ 0.7 mm. Installed with six screws per base plate.
**** Screw set for wood. Installed with six screws per base plate.

Name

Part No.

Fixing plate to panel wall

FP0300

Carriage bolt M10x30 (10 pcs)*

VB1301

Set of nuts M10 (10 pcs)*

MU1001

Self-threading screws 6.3×19 (10 pcs)**

SS6191

Self-drilling screws 5.5×22 (10 pcs)***

SS5221

Needle screws 6×35 (10 pcs)****

TS6351

Suspension Fittings

For suspending ladder from previously installed cat ladder. One set is required per ladder.

Suspension Fitting

Name

Part. no.

Suspension fitting (1 set)

UB5003

Bolt set M10x20 (10)*

BU1201

Nut set M10 (10)*

MU1001

Additional Elements

Single Handrail

The handrail is installed to the side of the ladders with or without safety cage. The handrail is folded 100 mm to the side to give more space for passing.

Handrails are normally installed one on each side, but in some cases, it may be sufficient on just one side.

The handrail can be equipped with anchorage lugs at the top that are used when working on a step plate. The handrail can also be used with an external sleeve for removability, which is useful when the ladder is installed below a hatch.

* Requires 4 bolts and nuts for ladders without safety cage, and 8 bolts and nuts for ladders with safety cage.

Name

Part No.

Single handrail

HL1200

Set of screws M10x60 (10 pcs)*

BU1601

Set of nuts M10 (10 pcs)*

MU1001

Plastic cover (1 / handrail)

PL0034

leeve for handrail

UH0515

Handrail With Loop

The handrail is installed to the side of the ladders with or without safety cage. The handrail is folded 100 mm to the side to give more space for passing.

A hoop is mounted on the handrail to bridge the gap to the roof surface. Handrails are normally installed one on each side, but in some cases, it may be sufficient on just one side.

The handrail can be equipped with anchorage points at the top that are used when working on a step plate. The handrail can also be used with an external sleeve for removability, which is useful when the ladder is installed below a hatch.

* Requires 4 bolts and nuts for ladders without safety cage, and 8 bolts and nuts for ladders with safety cage.

Name

Part No.

Single handrail

HL1200

Handrail hoop

HL1240

Set of screws M10x60 (10 pcs)*

BU1601

Set of nuts M10 (10 pcs)*

MU1001

Plastic cover (1 / handrail)

PL0034

Sleeve for handrail

UH0515

Handrail With Brace

The handrail is installed to the side of the ladders with or without safety cage. The handrail is folded 100 mm to the side to give more space for passing.

A brace is mounted on the handrail to a roof ladder/gangway, which bridges the gap to the roof surface. The length of the brace is adjusted during assembly, depending on the gradient of the roof.

Handrails are normally installed one on each side, but in some cases, it may be sufficient on just one side.

* Requires 4 bolts and nuts for ladders without safety cage, and 8 bolts and nuts for ladders with safety cage.

Name

Part No.

Single handrail

HL1200

Handrail brace

HL1290

Set of screws M10x60 (10 pcs)*

BU1601

Set of nuts M10 (10 pcs)*

MU1001

Plastic cover (1 / handrail)/p>

PL0034

Anchorage Point

The anchorage point/attachment point is for the lifeline. The attachment lug is mounted on the top of the handrail and is primarily for use when working standing on the step plate.

Name

Part No.

Eye nut M10

ÖM1000

Bolt M10x50

BU1050

Standing Platform

Standing platform 300 x 400 mm, adjustable 0-20°

NOTE! Standing platform requires 250 mm of free space against the wall.

* 2 nuts and bolts per standing platform.

Name

Part No.

Rest Landing

SP3040

Set of screws M10x20 (10 pcs)*

BU1201

Set of nuts M10 (10 pcs)*

MU1001

Intermediate Landing For Cat Ladder

In order to improve safety, ladders that are longer than 6 metres should be supplied with an intermediate landing/load distribution beam. On very long ladders, the distance between the intermediate landings should not exceed 6 metres. Version in accordance with SS 831340.

Intermediate landings comprise the following components:

1 grating with edge bar.
4 angle bars.
4 “half” safety cage hoops.
2 horizontal flat bars
7 vertical flat bars.
Each intermediate landing requires 2.1 m extra ladder.

Name

Part No.

Rest Landing 600 x 600 mm

VP6060

Single Handrail

The handrail is installed to the side of the ladders with or without safety cage. The handrail is folded 100 mm to the side to give more space for passing.

Handrails are normally installed one on each side, but in some cases, it may be sufficient on just one side.

The handrail can be equipped with anchorage lugs at the top that are used when working on a step plate. The handrail can also be used with an external sleeve for removability, which is useful when the ladder is installed below a hatch.

* Requires 4 bolts and nuts for ladders without safety cage, and 8 bolts and nuts for ladders with safety cage.

Name

Part No.

Single handrail

HL1200

Set of screws M10x60 (10 pcs)*

BU1601

Set of nuts M10 (10 pcs)*

MU1001

Plastic cover (1 / handrail)

PL0034

leeve for handrail

UH0515

Reinforcement Of Cat Ladder

Stiffening rails come as bent sections with a length of 1200 mm, which hook into each other and bolt to the side of the ladder. With an ingenious hook at the end of the section, we can construct a strong support profile using short sections. With a stiffening rail installed, the max. separation is 5.7 m compared to the standard 2.5 m. The rail can be used together with other accessories such as safety cage, standing platform, handrail, etc.

Name

Part no.

Stiffening rail cat ladder

ST 1200

Dropdown Ladder

With our solution, you can let the permanent ladder finish a good way up the wall and, even so, have access to an evacuation ladder that reaches all the way to the ground. On evacuation, you climb down the ladder, kick the locking device, on which the loose ladder comes loose and slides down to the ground. You then just continue, down to solid ground.

Name

Part No.

Drop down ladder lock catch

FB 7001

Drop down ladder slide fitting

FB 7000

Rubber stop

FB 7002

Self-Closing Gate

Self-closing gate for cat ladder.

Name

Part No.

Gate hoop (1x)

HL 5843

Hinge set (2x)

GJ 3400

Set of screws (10 x screws / gate)

SS 5221

For Lock Option

Hinge half (2x)

GJ 3401

Set of screws (10 x screws / gate)

SS 5221

Foldable Step Plate

Two standing platforms for cat ladders. Both of them are folding. They can be used with advantage where there is a need for an intermediate landing at the middle of the cat ladders, in order to stand more comfortably. This could be next to a service point or in the middle or a longer run of cat ladders.

The platform is normally folded back behind the rungs and it is easily pulled out with your foot.

The standing platforms are available for the whole width of the ladder or split so they can be used together with a fall arrestor/safety wire.

The single standing platform is assembled using 2 x M10x20 + locking nuts. The double platform is sold as a complete set, with the necessary fixing materials.

Name

Part No.

Folding standing platform single

SP 3740

Set of screws M10 x 20 (10 pcs)

BU 1201

Locking nuts M10 (2 x single platform)

LM 1000

Folding standing platform double/p>

SP 3716

Anti-Climbing Device

Device to prevent climbing up cat ladders.

Name

Part No.

Lockable anti-climbing device

KH 2100

Safety Cage

In the event of a falling height of more than 4 metres, the ladder must be fitted with a safety cage in accordance with BBR. The safety cage for the cat ladder is made up of modules with a length of 900 mm. The safety cage ends 2-2.5 m above ground and can be supplied with a hatch to prevent unauthorised access.

Version in accordance with SS 83 13 40.

* Installed with 7 bolts and nuts per hoop.

Name

Part No.

Hoop guard kit, 5 pcs bars, 900 mm

SK9005

Set of hoops

SK0650

Set of screws M10x20 (10 pcs)*

BU1201

Set of nuts M10 (10 pcs)*

MU1001

Lockable Hatch

Hatch for preventing unauthorised persons climbing any ladder with safety cage.

The hatch is installed on the rear edge of the safety cage brace and it can be locked with a padlock round the safety cage hoop to prevent unauthorised access. The hatch is raised up against the safety cage when passing.

Name

Part No.

Lockable hatch for safety cage hoop

LL4570

Locking nuts M10

LM 1000

Set of screws M10x20 (10 pcs)

BU1201

Gallery